EMC Electronic Mobility Controls   Primary Controls Regresar a EMC Products AEVIT® Gas and Brake Systems When Using the Factory Foot Pedals is not an Option _____________________________________________________________________________________ All AEVIT® systems operating the vehicle acceleration and braking controls, share the same components. The only difference between the systems is the "plug & play" Input Device(s) that you will use. Each of the systems or "Series" listed on this page will contain these standard components listed here. EMC offers optional Mounting Systems for the AEVIT® components. Check with your dealer for available options. Standard Components are listed below: Drive Module Vehicle Interface Module Information Center LCD Accel/Braking Servo Associated Wiring L-Series The AEVIT® L-Series is a Gas & Brake only system that utilizes a lever input device. The exposed lever height is 2.5" and the device requires a maximum input force that can be adjusted from approximately 2.4 - 5.0 lbs. The total angular displacement, or range, of the lever from the full gas position to full brake is 90 degrees. As shown in the cutout view, two horizontally opposed hydraulic dampeners provide the return-to-center mechanism and produce a smooth feel that can be adjusted by a Certified EMC Dealer. The lever itself rotates a 3/8" 303 Stainless Steel shaft supported by shielded bearings on each end. These bearings are manufactured to ABEC 3 specifications which outlines tolerances for size and geometric accuracy. Three discrete position signals are sent to the system's single drive module by the 3-channel potentiometer that is coupled to the rotating shaft. The L-Series input device can be positioned for either left hand or right hand operation. The control input enclosure measures 9.5” x 2.25” x 3.25”and weighs only 4.7 lbs. The flexibility of the software allows for a selectable Gas & Brake input direction, effort, and linearity curves, that can be programmed by a Certified Dealer or professional driver rehab specialist to suit each individual. YJ-Series The Y-Series is a Gas & Brake only system that utilizes a single axis joystick input device. The joystick is constrained to motion only in the Y-axis, thus the nomenclature Y. The exposed height of the joystick is approximately 4.25” and an angular displacement, or range, of only 50 degrees is required to move the input from the full gas position to full brake. The mechanism is extremely low-effort, requiring a maximum input force of only 0.2 lbs, and is internally spring loaded to return to the center, or null, position. The Y-Series input device can be positioned for either left hand or right hand operation. The control input enclosure measures 7.0” x 4.25” x 2.5” and weighs only 3.0 lbs.   Regresar a EMC Products   Somos "dealer" autorizado de las siguientes compañías: (Presione sobre el logo de la compañía para ver los productos que ofrecemos de cada una de ellas.)   Bruno Independent Living   Drive Master   EZ Lock   EMC Electronic Mobility The Braun Corporation   Q'STraint     VMI Vantage Mobility