The
EMC Power Kit is
designed to simplify
the adaptive
equipment conversion
process by providing
a central power distribution
point inside
of the vehicle. The Power
Kit® contains
all of the necessary
hardware and
circuitry to safely
transfer power from
the battery to
multiple, fused 12Vdc
constant hot and
12Vdc switched
ignition
outputs. This is
particularly useful
to the installer
when complex
electronic driving
controls are
utilized.
The Power Kit® main
features include, a
10A & 15A
resetable circuit
breaker, three fused
15A constant
hot circuits, and
four fused 10A
switched ignition
circuits. It also
provides a junction
point for the speed
and coil
signals and is
designed to filter
out noise interference
when used in
conjunction with AEVIT®
or the Gold
Series® console.
Easy
Installation
Each
EMC Power Kit®
is supplied with a 100A@12Vdc
circuit breaker
mounted to a unique
plastic "non-conductive"
bracket. Simply
remove one of the
main vehicle battery
terminals, slide
this bracket over
the battery post
using one of the
three supplied
holes, and then
reinstall the
battery terminal.
The circuit breaker
is mounted and
provides a handy
location for
connection to
battery (+)12Vdc.
If you are using the
AVPS®/b>
battery system from
EMC, then the
circuit breaker
bracket contains an
additional
fiberglass
"junction
post" with a
steel terminal. This
post is used to
connect all
aftermarket
equipment such as a
wheelchair lift/ramp
to the vehicle's
main power buss,
without having to
install new cables.
Somos
"dealer" autorizado de las siguientes compañías:
(Presione
sobre el logo de la compañía para ver los productos que ofrecemos de
cada una de ellas.)
Bruno
Independent Living
Drive
Master
EZ
Lock
EMC
Electronic
Mobility
The
Braun Corporation
Q'STraint
VMI
Vantage
Mobility
Equipos
Pro Impedidos de Puerto Rico, Inc.
Box 9734, Caguas, P.R. 00726
Carr. #1,Int. Rt.796, Km.4, Bairoa La 25 Caguas, Puerto Rico 00727
Tel: 787-746-7667 Fax:787-745-2840